<form id="hqfht"></form>
    <form id="hqfht"><tr id="hqfht"></tr></form>
    <wbr id="hqfht"><legend id="hqfht"></legend></wbr><nav id="hqfht"><code id="hqfht"></code></nav>
    <form id="hqfht"><em id="hqfht"><span id="hqfht"></span></em></form>

    <video id="hqfht"><em id="hqfht"></em></video>
    Rexx Logo



    More Website Templates @ TemplateMonster.com - July 28, 2014!

    Frequently Asked Questions
    DNS (Domain Name Service)


    Using External DNS servers as a backup to Rexx
    You can use the DNS servers of another ISP or DNS service as a backup
    to the Rexx servers. In this mode of operation, Rexx will serve as the "Master"
    DNS server and will notify it's Backup/Slave servers when you make changes to
    your DNS domains.

    In the DNS screen, click SETUP for the domain you wish to setup.
    The SERVICE TYPE should be set to "Master"
    In the section ALLOW TRANSFERS FROM you will need to enter the IP
    addresses of the external servers. You can enter multiple external slave
    servers by seperating the IP addresses with [;] semi-colons.

    You will most likely need to tell the external servers that our server
    on IP address 174.136.104.254 is the Master.

    Using Rexx DNS servers as backup to an External Master
    Our servers are also able to act as a backup for BIND compatable external
    DNS servers. (Most DNS servers support the BIND format.)

    In the DNS screen, click SETUP for the domain you wish to setup.
    The SERVICE TYPE should be set to "Slave"
    In the MASTER SERVER IP, enter the IP address of the external
    server that will be the Master. Our server will accept change notices
    from that IP address only, and will contact that IP address when requesting
    updates.

    Note that when you try to edit a domain that is in SLAVE mode, our system
    will display the data it got from the Master Server. You must edit the
    data at the Master server.













    真人对战捕鱼